Popsicle Clay Cutter

Summer memories are often tied to popsicles - sitting on a dock, watching a baseball game, or admiring Fourth of July fireworks. Capture that same summer spirit in your craft projects with our clay cutter.

Material:

Premium PLA, a thermoplastic material, produced from renewable resources. Due to its natural origins, PLA biodegrades into non-toxic substances, making it an environmentally friendly and sustainable option.

Size:

Please refer to the measured image in the listing when choosing the size of your cutter, as it reflects the location of the measurement. The measurements correspond to the size of the shape created when pressed into polymer clay.

Care:

Maintain the cleanliness of your cutters by washing them with lukewarm water and soap, or gently wiping off any remaining polymer clay with a wet wipe. It is important to note that these cutters are unsuitable for dishwashers and should be kept away from heat and sunlight. To preserve their condition, store the cutters in a cool dry area. While the cutters have some flexibility, they are susceptible to breakage if bent or mishandled.

To Use:

When using your new clay cutter, gently press it into the polymer clay until the cutting edge makes contact with the work surface. Then, wiggle and lift to remove. Work on a ceramic, glass, or acrylic tile for optimal results, as this will prevent the clay from sticking to the cutter. To further prevent sticking, we suggest lightly dusting either the clay surface or the cutter with cornstarch.